 |
Order multiple racing batteries and accessories by clicking on the add to cart button to the right, view larger images by clicking on the racing battery image.***FREE SHIPPING ON ANY AND ALL ORDERS!!!
Heavy Duty Solenoids
Many starting problems can be traced to an inadequate solenoid. Our Heavy Duty Solenoid solves these problems forever. Model 3010 includes a surge protector to prevent a spike in voltage.
3010 Heavy Duty Solenoid
3020 Heavy Duty Solenoid
Type SS-2060 Sealed Racing Solenoid
Features
Water resistant
Doulbe-make or double-break contacts
Capable of handling high and low current requirements
Black impact phenolic casing
Engineering Data
Contacts
Pole form-SPNO and SPDT
Material-silver alloy
Termination-5/16"-24UNF-2A thread
| RATINGS |
| Volts DC | NO | NC |
| Cont. | Inrush | Cont. | Inrush |
| 6 | 200A | 600A | 100A | 300A |
| 12 | 200A | 600A | 100A | 300A |
| 24 & 36 | 200A | 600A | 100A | 200A |
Coils
Voltage-6 VDC through 48 VDC
Termination-#10-32 UNF-2A thread
Power (approzimate)
Continuous 12 watts SPDT, 8 watts SPNO
Connections
Coil isolated (two terminals)
Operate (77°F/25°C)
67% of nominal coil voltage (intermittent)
75% of nominal coil voltage (continuous)
110% max. safe of nominal coil voltage
| COIL DATA |
| Volts DC | Resistance in Ohms |
| Intermittent | Continuous |
| SPDT | SPNO | SPDT | SPNO |
| 6 | 2.2 | 3.3 | 3.3 | 5.25 |
| 12 | 8.4 | 13.2 | 13.2 | 21.0 |
| 24 | 18.4 | 30 | 30 | 47 |
| General Data
Dielectric Strength
·500 Volts
Temperature Range
·-40°F/-40°C to 149°F/65°C
Mechanical Life (no load)
·100,000 cycles
Electrical Life (rated load-making & breaking 200 amp on NO Contacts)
·50,000 cycles
Mounting Position
·Recommended mounting is vertical plane with coil terminal up
Weight (approximate)
·SPNO-24.0 oz.
·SPDT-26.0 oz.
Duty Cycle
·Continuous
·Intermittent-10 seconds "on" maximum and minimum 60 seconds "off"
One minute "on" maximum and minimum 6 minutes "off"
Hardware Torque Specifications
·Contact Terminal: 60 inch-lbs. max
·Coil Terminal: 12-18 inch-lbs. max.
To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.
SPECIFICATIONS:
Insulated Coil Terminals
Preferred Mounting Position-Coil
Terminals Up
|
|
1 16 Volt Battery &
16 / 12 Volt Battery
Race Cranking Amps:
5 seconds continuous @
75°F to 7.2 volts = 1050 Amperes
15 seconds continuous @
75°F to 7.2 volts = 950 Amperes
30 seconds continuous @
75°F to 7.2 volts = 750 Amperes
Click for 16 Volt Battery Info |
|
